Rod Pin Mill for Diamond

Rod Pin Mill for Diamond technology is one of the important basic technologies in the modern industry. In modern industries, the raw materials that require a powder state have a small and uniform particle size and higher purity, and ultrafine raw materials. Its nature changes, which makes ordinary materials have a broader application range,

Rod Pin Mill for Diamond and cyclone separators, dust collectors, and vents into a complete crushing system. After filtering the compressed air, the high-speed nozzle is sprayed into the pulverized chamber, and the material is repeated, friction and shear at the intersection of the multi-high pressure airflow.
The crushing material moves together with the rising airflow to the pulverized region under suction of the fan, producing a strong centrifuge generated by a high speed rotary pulley. Under the action of force, the fine particles are separated, and the cyclone and dust collectors are collected by the pulverizing wheel according to particle size particles, and the coarse particles fall into the pulverized region to continue to be pulverized.

A energy company is a professional company with lithium-ion power cells for new energy vehicles, and industrialization of lithium-ion batteries in the energy storage. High-tech enterprises, the company actively responded to the national policy call, in order to promote the rapid, sustainable development of new energy vehicles, sustainable development, adhere to the road to independent research and development, have a core technical system with complete independent intellectual property, successfully developed multiple The series of lithium-ion power battery batteries have been widely used in China's electric new energy vehicles, and market distribution has spread all over the country.
Case parameters:
Product particle size: D50: 15μm
Hour yield: 600kg

1. Check if all the lines, electrical components, etc. of the pulverizer are inspected, and whether it is possible to work. Whether the machine is grounded, so that the housing is powered by electric shock. Whether the machine spindle has a card death, if it should be handled in time. Whether the machine has an abnormal situation during operation, if there is a stop check.
2, check the blade, is tightened, whether the blade gap can reach the specified standard. Before using the pulverizer, check the working room is enough or slidable, if it should be removed in time.
3, after the offset is running, it can begin to start the feed. The pulverizer should stop the feed before stopping. Wait until the machine is completely discharged, it can be stopped.
4, the feed should be uniform, not over, so as not to increase the burden on the machine. The pulverizer cannot be cleaned, maintenance, etc. during operation.

ALPA Technology recommends that you are using ultrafine airflowWhen destinating machines, jet grading machines, powder classifiers, etc., must pay attention to regular inspection of the performance of the equipment to prevent malfunctions during use.