2021-12-07 10:15:47
Ring Roller Grinder of Modified STARCH is a very convenient device that can be used to crush all kinds of products, especially some fine particle products.
Ring Roller grinder of modified starch In today's industrial production is very wide, it is usually used to smash the added value of materials. After ultrafine crushing, it is generally widely used, and the value is higher, and it is loved by the industry.
AlPa Iron Ring Roller Grinder of Modified Starch Share: The customer's main business is the production and sales of special powder for anti-rust pigments and diamond tools industry. The raw material production and processing, new products are developed in one, with a production and sales enterprise of phosphate, such as mining, smelting, powder, and new materials.
The customer needs to perform airflow grading to the iron phosphate ultrafine powder, eventually experimenting with our company's grading function to meet the customer needs.
Product particle size: D97: 18μm
Hour Yield: 80kg / h
Ring Roller Grinder of Modified Starch is widely used, do you know how to use it correctly? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5, Precautions
(1) When the unloading equipment is run, the unloading port cannot be reached to avoid accidents.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
Welcome everyone to inquire!
