Hammer Grinder for manganese oxide

Currently, Hammer Grinder for Manganese Oxide has gradually entered people's lives, more and more plants, and companies are using the equipment.

For Hammer Grinder for Manganese Oxide's service life, it is always necessary to keep in mind using common sense.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Hammer Grinder for Manganese Oxide is cleaned in time after use. Keep the internal cleaning of Hammer Grinder for Manganese Oxide to avoid oxidation of the material and the inner contact.


ALPA Battery Hammer Grinder for Manganese Oxide Case Sharing:
A new material company is a modern high-tech private enterprise integrating R&D, production and sales. The company teamed up with the research team of many universities to transform the international leading patented technology to high-tech products, filled the domestic technical gap. The company will rely on lithium-electric positive material materials as the core, with its company to form an interrelated, left and right support, collaborative support, comprehensive utilization cycle industrial chain.
Case parameters

hour yield: 200-300kg

For long-term \"health\" of the equipment, we need to take some steps to protect it again.
1. First, the gap of the hammer screen can be adjusted: the friction on the screen changes varies from the distance between the material and the screen, and the friction is different. Improve the hammer speed and hammer material efficiency by adjusting the hammer net gap. However, during the production process, the screens they use are different, the raw materials are different, the hammer screening gap needs to be adjusted; in the crusher, the crusher is not very good at the beginning, but after a period of time Work, the particles inside the crusher also changes; in the grinding machine parts, the hammer head is easily worn, and the gap between the hammer head and the screen is increased, and the yield is also declining, it is difficult to maintain.
Of course, in order to test the output of a crusher, for some of the materials, for some screen, in order to determine the appropriate hammer sieve gap, no matter the screen and hammerThe life of the child can get very high grinding efficiency data in a short time. However, in the production of feed grinding, such specific measurement data, according to the operator's work experience, the technical content of the crusher itself is two things. People with enrichment of experience and labor experience also require higher operating costs. When the hammer is worn, the gap between the hammer and the sieve increases, the friction is reduced, and the abrasive efficiency is lowered.

3. Put the friction piece into the Hammer Grinder for Manganese Oxide: The friction piece has the effect of the material ring, but the effect is limited. First, the teeth of the friction plate are in front of the hammer head, the friction surface is small, and the hammer is long-lasting; if the sieve area is too small, the output screen area will be reduced.
For any of the equipment, everyday maintenance can be performed, it can ensure that the equipment can run for a long time, so daily is critical to Hammer Grinder for Manganese Oxide.

Welcome everyone to inquire!