Turbo Mills of Cedar Skin

Turbo Mills of Cedar Skin is one of the commonly used ultra-fine pulverization methods, widely used in ultra-fine pulverization or fine pulverization of materials such as non-metallic mine, chemical, chemical, metallurgical and other industrial materials, and has a fine particle size, narrow particle size distribution. The surface of the particles is smooth, the particle rules, high purity, and high activity.

Ultrafi Turbo Mills of Cedar Skin application advantages
Ultrafine pulverizer is generally used in industrial and ultrafine pulverized machines with mechanical law, physical law and chemical method.
In the food industry, the main method of producing food ultrafine powder is mechanical law.
According to the material stress condition and mechanical movement of the destruction process, the mechanical method can be divided into airflow failure method, media mixing and damage method and impact damage; according to the material medium, mechanical law can be divided into dry destruction. Method and wet destructive method.
Fruit and vegetable material is more complicated in destruction, and there is more dry destruction.
When there is destruction of fruits and vegetables, it should be paid to the extent of damage, the processing process is not contaminated, avoiding the loss of material nutrients in the process process. It is used to destroy her herbs, and can also be used to destroy pollen, pearl powder, can reach a very good destruction.

ALPA seaweed feed Turbo Mills of Cedar Skin case sharing: The company is a seafarer enterprise in Yantai. During the breeding process, it can be used to smash the seaweed. After crushing, it can be used as a feed for sea cucumber. The cost of the purchase of feed. By comparing a long-term use of Turbo Mills of Cedar Skin, it is possible to purchase the feed for several years, which may save the cost of the production line several years. The company purchased our AlPa's Turbo Mills of Cedar Skin.
Technical parameters:
Finished particle size: D90: 400 mesh

Turbo Mills of Cedar Skin is widely used, do you know how to use it correctly? ? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency,Then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

The equipment market is changing. At present, Turbo Mills of Cedar Skin has certain demand in the market, but the society is constantly evolving, no matter what industry needs to advance, it can lead the industry.