Turbo Mills for Nylon Powder

Turbo Mills for Nylon Powder is one of the common ultrafine pulverization methods, widely used in ultra-fine pulverization or fine pulverization of materials such as non-metallic mine, chemical, chemical, metallurgical and other industrial materials, and has a fine particle size, narrow particle size distribution. The surface of the particles is smooth, the particle rules, high purity, and high activity.

Turbo Mills for Nylon Powder is an apparatus that utilizes air separation, heavy polishing and shear to achieve a dry material ultrafine pulverized. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material acquisition system, and the like. The material enters the cylindrical crushing chamber through the feed port and is pulverized and pulverized by a grinding wheel moving around the wear rail. The pulverized material is taken out from the crushing chamber through the negative pressure air flow caused by the fan and enter the material collection system. After filtering the filter bag, the air is discharged, collecting materials and dust, and completes broken.

ALPA pea protein Turbo Mills for Nylon Powder case share: The customer is a food company in Russia. After looking for a lot of powder equipment companies, they have not found appropriate equipment. It has been influenced by the company's production and operation, and finally I saw the ultra-smash of pea protein before our website. Finally, through the incoming experiment, I finally determined the Turbo Mills for Nylon Powder purchased our company.

Technical parameters:

Finished particle size: 400 mesh
Production capacity: 1.5T

In the production process, we should pay attention to maintenance and maintenance of Turbo Mills for Nylon Powder.
1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find the cause and troubleshoot.

2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.

3, which should be regularly inspected, replace it in time to ensure quality and production.
4, the wear of the blade and lining should be checked regularly. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) The temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9, strictly forbiddenTurn the handle of the handwheel during the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.
Shandong AlPa is a 20-year experience manufacturing company with Turbo Mills for Nylon Powder equipment, with a number of patents, welcome to inquire!