Turbo Mill for Ferroalloy

Turbo Mill for Ferroalloy is well balanced, only need to be produced in a smooth floor, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.

The variety of Turbo Mill for Ferroalloy now is now very large, and its crushing quality and level are also very large. In general, assessing crushing properties in crushing is expressed in crushing efficiency, pulverizing precision. However, the definition of crushing efficiency and pulverization accuracy has many inconveniences in practical applications. Through the general definitions of the crushing efficiency of the assessment of unity and disadvantage of the assessment of crushing properties.

AlPa Aluminum Gas Powder Turbo Mill for Ferroalloy Experiment: A environmental protection technology company needs to grade aluminum ferrite for aluminum silicate due to production demand, because uncertain demand can not be achieved, so it is experimentally Experiments We AlPA's air grading machine can grade the aluminum silicate ultrafine powder provided by the company. Finally, the product particle size obtained by the experiment: D90: 18.3 μm, yield: 460kg / h 加 加 加..
Welcomes all major Powder grading requirements manufacturers, to the factory, incoming experiments.

Turbo Mill For Ferroalloy's motor conservation measures
1. Check whether the lubrication of the bearing is good
2. Check if all fasteners of the pulverizer are tightened.
3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.

If you have something about other crushers, you want to know, welcome to consult!