Pin Mill of Gold Mine

Pin Mill of Gold Mine is a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from dozens of minor tests, Hundreds of tons of large production, PIN MILL of Gold Mine With its narrow particle size distribution, the average particle size is fine; the powder has good shape, high product purity; suitable for low melting point, thermal drugs; sealed, less pollution; Easy; crushing - mixing - dry online operations, etc. have been widely recognized by the company.

A Pin Mill of Gold Mine costs high, if you want to use Pin Mill of Gold Mine for a long time, please pay attention to the following:

In the production process, Temperature rises in the bearing frequently, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. The host and level scratch bearing of Pin Mill of Gold Mine uses 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a seven-point introduction to the daily maintenance of Pin Mill of Gold Mine.


ALPA Phenolic Resin PIN MILL OF Gold Mine Case Sharing: The company has a manufacturer of phenolic resin in its customers. The company has found a lot of powder equipment companies. Suitable equipment. Finally, we found our AlPa. After the experiment, our company's product Pin Mill of Gold Mine.
Technical parameters:
Finished product particle size: D50 less than 5μm
Production capacity: greater than 50kg / h

1. In the production process, the gas flow baffle should be checked regularly. When the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, exclude Fault.
2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production.
4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), otherwise the bearing temperature is too high.

Shandong AlPa is a well-known particle and powder processing system supplier, which is committed to the change of traditional powder industry. We provide customized and passed CE certified products: airflow pulverizer, mechanical pulverizer, airflow classifier, ball milling production line, surface modification production line, etc. In the field of medical, food, chemical, minerals, new materials, solid waste treatment, we have a mature full-specific solution. We provide more than just machines. We help you design the ideal system to meet your needs. In the past 20 years, \"the future\" of the advanced materials in powder technology \"has always been our company mission. We look forward to and desire to embrace the future. To this end, we have made full preparation. We wish to grow together with you.