2021-11-29 11:08:40
In the classification operation of the industrial production at this stage, the use of Vibration Crusher of Ammonia Rubber Coating is mainly targeted for the effective crushing of solid particles, and is a crushing device that is commonly used in the product ultrafine pulverization process. .
The components of the Vibration Crusher of Ammonia Rubber Coating include drive motors, pulveration wheels, fine powder and coarse powder outlets, raw materials inlets and two air imports. In addition, it is widely used and is a very good machine. Vertical air pulverizer can be used in squares, crystalline stone, quartz, gypsum, silica, corundum, cement, alumina, etc., which plays an important role.
AlPa Organic Pigment Vibration Crusher Of Ammonia Rubber Coating Case Sharing: The company is a Taiwan chemical raw material enterprise. In 19 years, the company purchased a mechanical grinding machine for pulverizing organic pigments from our AlPa.
Technical parameters:
Finished particle size: D50 less than 325 mesh
Production capacity: 300kg
The reason for vibration vibration and solution can be from the following aspects Perform:
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.
ALPA is a professional powder airflow mill manufacturer, complete model, quality assurance, high quality, sell well, easy to operate, powder airflow mill, welcome new and old customers to consult!
