Hammer Mills of Lithium Fluoride

With the continuous advancement of pulverizer technology, Hammer Mills of Lithium Fluoride has been familiar with people. The most popular crushing equipment is now Hammer Mills of Lithium Fluoride. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.

Hammer Mills of Lithium Fluoride has the characteristics of precision, small, high, high, no dust, cleaning, easy to operate, and beautiful modeling, etc. The pulverized tank and the blade are manufactured by stainless steel. It can complete the crushing and fine powder in 3 seconds - 2 minutes. It can quickly crush a variety of Chinese herbal medicines and most of the food, wide and wide, and different nature materials can be very smashed. Loss, smash different materials will not be stronger. Such as Western ginseng, ginseng, three seventh, placenta, flyer, pearl, white peony, green beans, soy, sesame, rice, corn, etc. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease.

ALPA Crystalline Sulfur Hammer Mills of Lithium Fluoride Case Sharing: Shenyang needs an apparatus capable of ultrafine pulverization of crystalline sulfur. Crystalline sulfur is a flammable and explosive raw material, so there is a very high demand of the explosion-proof system of the pulverized apparatus. After multi-examination, our company's nitrogen protection Hammer Mills of Lithium Fluoride met the production needs of the company. Hammer Mills of Lithium Fluoride has an advantage in security, production capacity, energy consumption.

Technical parameters:

Finished particle size: 200-300 mesh
Production capacity: 1.5T


Ultra-micro Hammer Mills of Lithium Fluoride operating procedures

1, need to boot Check if the lubrication is oil.

2, clearing the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.

Shandong AlPa is a 20-year experience manufacturing company with Hammer Mills of Lithium Fluoride equipment, with a number of patents, welcome to inquire!