Impact Mill for Chili Stick

Impact Mill for Chili Stick is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

For Impact Mill for Chili Stick The service life is longer, so that it has been kept in good performance, and it is necessary to keep in mind usage.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Impact Mill for Chili Stick is cleaned in time. Keep the internal cleaning of the Impact Mill for Chili Stick to avoid oxidation of the material and the inner contact.



ALPA Desulfurizer Impact Mill for Chili Stick Case Sharing: The company is a high-tech company that requires a desulfurizer crushing machine, investigating a number of powder equipment manufacturers at home and abroad, Finally, I chose our AlPa's Impact Mill for Chili Stick.
Technical parameters:

Production capacity: 4-5T


The reason for the vibration of Impact Mill for Chili Stick and the solution can be from the following In terms of:
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.

3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.

ShandongAlPa is a 20-year experience manufacturing company with Impact Mill for Chili Stick devices, with a number of patents, welcome to inquire!