Turbo Crusher of NEEDLE COKE

Turbo Crusher of Needle Coke is one of the common ultra-fine pulverization methods, widely used in ultra-fine pulverization or fine pulverization of materials such as non-metallic mine, chemical, chemical, metallurgical and other industrial materials, has a fine particle size, narrow particle size distribution, The surface of the particles is smooth, the particle rules, high purity, and high activity.

The following is a detailed description:

1. Feeding particle size control

Most Turbo Crusher of Needle Coke has a certain upper limit requirement for the feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium

At present, the working medium of Turbo Crusher of Needle Coke is mainly compressed, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed

Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Particle size

Turbo Crusher of Needle Coke In the pulverization process, as the material particle size is reduced, the crystallization and intensity of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached. At this time, the material specific surface area increases, the surface activity of particles increases, and the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is extended, it is difficult to further reduce the particles of the material.size.


ALPA Activated Carbon Turbo Crusher of Needle Coke Case Sharing: This customer is a research institute Dalian, which requires ultrafine pulverizing activated carbon during research. Investigate a number of domestic vendors, and finally choose to work with our AlPa, and purchased a Turbo Crusher of Needle Coke.

Let's learn with Xiaobian to learn the Turbo Crusher of Needle Coke inspection steps.
Turbo Crusher of Needle Coke is an ultra-smuggled apparatus for dry material ultrafine pulverized equipment in the form of air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.

A disc airflow pulverizer first carefully checks whether there is damage in the transportation in the transportation, then put the high machine and the auxiliary electrical control unit in place, and then turn on the pipeline of the main aircraft, each When equipped with a tube, the \"iron anchor 609\" is used to protect the \"iron anchor 609\" to ensure the sealing of the pipe, and each single machine and pipe are connected to the ground wire and grounded to avoid dust explosion caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm and the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty bus, the operator should carefully observe the various instruments on the control cabinet, and they can be pushed. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subtracted to ensure that the normal operation of the discharge is fixed. The stepless shift handle of the classifier can change the speed of the hierarchy, and achieve the excellent adjustment of the product. If the product particle size is required, the speed can be improved, and the rotational speed is reduced, and large particle size particles can be reduced.

The user receives the normal acceptance operation process after receiving the Turbo Crusher of Needle Coke product. You can try to identify the use.

Alpa Technology recommends that you are using ultrafine air grade units When devices such as grades, powder grading machines, be sure to pay attention to the performance of the equipment periodically and prevent malfunctions during use.