Cell Mills of Rhubarb

It is well known that this product technology in Cell Mills of Rhubarb has received extensive attention from the industry.

Cell Mills of Rhubarb:

Using high pressure airflow with animal material to break, ensure the purity of materials, facing individual hardness, high materials, can use high hardness ceramic corundum as a pulverizing cavity It greatly reduces the wear of the material on the pulverizer to ensure that the purity of the material is low-temperature, or the inert gas can be pulverized, such as nitrogen, carbon dioxide, is suitable for high activity, flammable and explosive non-metallic mine powder.

High capacity, fast efficiency; compared with other ultra-fine pulverizations of the same capacity, because Cell Mills of Rhubarb continuous feed, continuous crushing, continuous recovery, the characteristics of continuously improvement, and then With the mode of automation control, the advanced level is much higher than other devices.

The structure is simple, the disassembly and cleaning is convenient, there is no need to lubricate oil, etc.

The product is fine, and the particle size distribution is uniform. Because Cell Mills of Rhubarb comes with the hierarchical effect, the ultrafine powder produced is excellent, and then with Cell Mills of Rhubarb. More make the product particle size and distribution are far better than the processing of other equipment.

ALPA Soda Coll Mills of Rhubarb Case Sharing: The company is a chemical enterprise, it is necessary to make ultra-smash of small soda, and investigate a number of powder equipment enterprises, and finally chose us. Alpa's Cell Mills of Rhubarb.
Technical parameters:
Finished product particle size: D97: 20μm
Production capacity: 10-220kg

In order to have a further understanding of Cell Mills of Rhubarb, the following simple analysis is pulverized Uplined problems and how to solve these problems.
1, ask: How to choose equipment in the face of materials that need to be smashed?
A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
2, ask: The custom pulverizer can be used in different materials. What is the difference between them?
A: (1) After the food and drug is crushing, the best choice for food safety and stainless steel materials is needed because there is no iron pollution in the mirror..(2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal.(3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.
The company has consistently follows the management of standards, puts the quality in front of the production and service policy, and provides products and services to our customers with confidence and weighing airflow mills.