Impact Grinder for Sepiolite

Impact Grinder for Sepiolite is a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from dozens of micro tests from dozens of minor tests to several hundred A few tons of large production, Impact Grinder for Sepiolite is narrow, the particle size distribution is narrow, the average particle size is fine; the powder is good, the product is purity; suitable for low melting point, thermal drugs; good sealable, less pollution; Crushing - Mix - Dry Online Operation and other major characteristics have been widely recognized by the company.

Impact Grinder for Sepiolite is powered by the adiabatic expansion of the compressed air and the compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product.

In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize.
The air pulverizer has an upward nozzle under the bottom of the pulverized chamber, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by a nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.

ALPA Permanganate Impact Grinder for Sepiolite Case Sharing: This customer is mainly engaged in the development of high energy chemical energy development. The study needs a device that can make ultraf fine pulverized in high potassium permanganate. Finally, I purchased an Impact Grinder for Sepiolite in our AlPa.
Technical parameters:

Finished granularity:

100-325 mesh
Production capacity: 5kg


The reason for the vibration and solutions can be from the following Aspect:
1, the hammer installation error in maintenance assembly.When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.

2, the difference between the weight of the two sets of hammer exceeds 5 grams.The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.

3, individual hammer card is too tight, there is no open in operation.After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation.The solution is to school straight or replacement.
6, the bearing gap exceeds damage.It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running.The solution is tightening.

If there is related requirements, please call us!