Vibration Mill for Rubber Chemicals

With the development of society, the application of Vibration Mill for Rubber Chemicals has become more large.

The overall development trend of China's material ultrafine crushing technology is to make a more ultra-fine pulverized equipment to various types of ultra-fine pulverization equipment towards low-cost, high efficiency, strong dispersibility, good dispersibility and stable quality. High technical requirements.

Vibration Mill for Rubber Chemicals Engineering Technology will need more and more high-purity ultrafine powder, and ultrafine powder technology will play an increasingly important role in high-tech research and development. Although high-purity ultrafine powder is prepared by chemical synthesis, it is too high, which is extremely difficult for industrial production. The main means of obtaining the ultrafine powder is still mechanical and pulverized, and ultra-fine pulverization technology is a combination of many technologies. Its development also depends on the progress of the relevant technology.

Therefore, the main development trend of ultrafine pulverization equipment has been developed with fine pulverized equipment with ultrafine pulverized equipment. Ultrafine pulverized equipment with low energy consumption, small land, and has high handling capacity. Integrated development of equipment and process research.

Ultra-fine pulverization and supporting equipment must be adapted to specific bored features and product indicators, and the scale model must be adapted.

ALPA desulfurizer Vibration Mill for Rubber Chemicals case sharing: The company is a high-tech company that requires a desulfurizer crushing machine, investigating a number of powder equipment manufacturers at home and abroad, and finally chose our Alpa's Vibration Mill for Rubber Chemicals.
Technical parameters:
Finished particle size: 200 mesh 90% passed
Production capacity: 4-5T

Ultra-micro Vibration Mill for Rubber ChemicalS is to use air separation, heavy polishing The shear is used to realize the ultra-smash of dry materials, and are widely used in various industries. Let's take a brief introduction to its daily maintenance content.
1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.
2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, the full load of the machine is the bearing, so good lubrication and bearing service life have a large relationship. It can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected.Sign, the seal is good.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.

ALPA technology research and development crushing equipment has been applied in many actual engineering cases, providing basic information for objective understanding of jet grading technology.