Pin Grinder for graphite anode

Environmentally friendly PIN Grinder for Graphite Anode has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the mechanical processing and manufacturing industry in the stage has gradually replaced the traditional rough mechanical processing and production. It has also become a new dominant leading to the realization of technological innovation and upgrading at this stage.

When the PIN Grinder for graphite anode screen material, the screen has good smoothness under the pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the pulverizer without a rotating member. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors.

The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization region, the strongest, and the strongest effluent is separated under a high speed rotary pulverized turbine. The fine particles that meet the particle size requirements are entered into the cyclone or dust collector by the gap of the pulverized wheel blade. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.

ALPA Battery PIN Grinder for Graphite Anode Case Sharing:

A new energy company is a high-tech enterprise specializing in research and development, production and sales of new energy materials. The company is committed to new energy materials research and Innovation, the company's products include lithium batteries special tetrashydrium 3 oxide, magnetic material tetraside and lithium battery positive electrode material manganese acid.

The company has advanced technology and excellent quality, and has established a complete quality management operation system.
Case parameters
Product particle size: D50: 15μm
Hour Yield: 600kg

How does PIN GRINDER for graphite anode?

before power on, the connection site, sealed and line Waiting for details, all checks are not issued before they can run the powder classifier.

The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power.The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.

If you have the situation about other crushers, you want to know, welcome to consult!