Rod Pin Mill for Graphene

Rod Pin Mill for Graphene mainly applied the pulverization mechanism determined its scope of application, high finished product, widely used in chemical, minerals, metallurgical, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food, health care Products, new materials and other industries.

The components of ROD PIN MILL for Graphene include drive motors, pulverization wheels, fine powder and coarse powder outlets, raw materials inlets and two air imports. In addition, it is widely used and is a very good machine. Vertical air pulverizer can be used in squares, crystalline stone, quartz, gypsum, silica, corundum, cement, alumina, etc., which plays an important role.

ALPA Gypsum Rod Pin Mill for Graphene Case Sharing: The company is a more well-known non-metallic mine company in South Africa. The company's main product is a super fine ultra-fine micropowder of the non-metallic mine such as stone and gypsum. Our website learned our equipment, read our case, and finally choose Rod Pin Mill for Graphene, who bought our company as its gypsum ultrafine powder production line.

Technical parameters:
Finished granularity: D97: 5μm
Production capacity: 140kg

Ultrave ROD PIN MILL for Graphene is the use of air separation, heavy polishing, shear Forms to realize the ultra-smuggle equipment for dry materials, and are widely used in various industries. Let's take a brief introduction to its daily maintenance content.

1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.
2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.

Shandong Alpa supplies a variety of ROD PIN MILL for Graphenes. If you need to buy Rod Pin Mill for Graphene,Feel free to contact us any time.