Impact Mills for polyurethane

Impact Mills for polyurethane is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is smudged, the granules are delicate, and the price is affordable.

The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.

Cerium oxide mechanical milling machine technical parameters:
finished particle size: 200-2000 mesh
Production capacity: 10-30kg

As a crusher, Shandong AlPa has been working to customers Provide greater value, the fineness, production capacity, and installation venues of each project are important information for custom selection, pre-sales service, 24-hour online customer service to answer questions, provide ideal communket production line solutions And accordingly, it provides the factory quotation to increase the escort for the cerium oxide crushing project.

Impact Mills for polyurethane is an apparatus for ultrafine pulverized dry materials with air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.

A disc airflow pulverizer first carefully checks whether there is damage in the transportation in the transportation, then put the high machine and the auxiliary electrical control unit in place, and then turn on the pipeline of the main aircraft, each Seal in seal is used in seals when assemblingIron anchor 609 \"liquid sealant to ensure the sealing of the pipeline, and each single machine and pipe are connected to the ground wire, and ground to avoid dust explosion caused by electrostatic sparks. Before each single-machine trial operation, check the machine There is a metal item, if it is excluded. If the bolt is firm, the tightness of the belt, the reliability of the protective cover, etc. After the air car is running, the operator should carefully observe the various instruments on the control cabinet, and to be airborne current stable After that, it can be pushed. After the press, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subjected to the amount, ensuring that the normal operation of the discharge is fixed. The stepless speed handle of the hierarch can be changed. The speed, at the same time, the excellent adjustment of the product. If the product is required to be fine, the speed can be improved, and the speed is reduced, and the speed is reduced.

The user receives the normal acceptance operation process after receiving the Impact Mills for polyurethane product. Everyone can try to identify the use.