Cell Crusher of Metformin Hydrochloride

Cell Crusher's Metformin Hydrochloride is one of the common ultrafine pulverization methods, widely used in non-metallic mine, drugs, chemicals, metallurgical and other industrial materials ultrafine pulverized or fine pulverized, with product particle size, narrow particle size distribution, The surface of the particles is smooth, the particle rules, high purity, and high activity.

1, more other models significantly reduce investment and use cost, suitable for low value-added coarse powder;

2, energy consumption Small noise; simple structure, less lossless parts, simple and easy maintenance;

3, low speed large diameter single-class wheel, large production capacity; internal wall wear protection;

4, Automated operation, smart instrument monitoring, low labor cost and labor intensity;

5, negative pressure running free dust leaked; achieve environmental protection and labor safety requirements;

6, run stable and reliable, product Uniformity and consistency.

The above is to introduce the working principle and characteristics of Cell Crusher of Metformin Hydrochloride, CELL CRUSHER OF METFORMIN HYDROCHLORIDE is concentrated, and the popularity of customers receives their customers. Welcome to inquire!

Technical parameters:
Finished particle size: D50 less than 5μm
Production capacity: greater than 50kg / h

1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.
2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for placement activitiesThe top surface is on the plane, and the dust such as dust is required to avoid the incoming material that cannot be broken, and the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached.Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.