2021-11-18 09:07:37
Rotor Grinder of Modified Silica is used as a clean, efficient, high-level, high-yield of advanced crusher models in the pulverization of Western medicine producers, and test from a few tres of microsteration At the time of hundreds of tons of large production, gas flow milling with narrow particle size distribution, average particle size; good powder shape, high product purity; suitable for low melting point, thermistory drug; good sealable, low pollution; Easy to operate; crushing-mixed-dry online operations, etc. have been widely recognized by the company.
The crushing product is in addition to the particle size, and the particle size distribution is narrow, the particle name is smooth, the particle shape is high, and the high activity is high, the dispersibility is good.
AlPa Phosphate Rotor Grinder of Modified Silica Case Sharing: The customer's main business is the production and sales of special powder for rust-proof pigments and diamond tool industries. The raw material production and processing, new products are developed in one, with a production and sales enterprise of phosphate, such as mining, smelting, powder, and new materials.
The customer needs to perform airflow grading to the iron phosphate ultrafine powder, eventually experimenting with our company's grading function to meet the customer needs.
Product particle size: D97: 18μm
Hours Yield: 80kg / h
Super-rotor grinder of modified Silica before debugging:
1, newly installed equipment, in the device When it is connected to a crushing, it is inevitable that foreign matter such as iron blocks, welding heads, welding slags will remain. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.
