Pin Mills for Phosphorus Amine

In this economically flourished area, there are many people who know the airflow pulverizer, and the Pin Mills for Phosphorus Amine technology is in a leading position in the same industry.

PIN MILLS for Phosphorus Amine will rise during operation, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.

AlPa Chicken Pin Mills for Phosphorus Amine Case Sharing: The company is a Spain, the company needs to smash a chicken protein, asking all kinds of powder equipment companies in Europe, there is no suitable equipment . Later, I learned that our ALPA, the testism sent us a message, and we didn't know if it was received after receiving the email. But our ALPA still decided to try it, and then let the customer maidens will be experimentally. Through multiple experiments, we have identified a crushing equipment that meet the particle size needs of the company. Finally, the company also purchases the series of equipment.

Technical parameters:
Finished particle size: 100μm
Production capacity: 500kg

How does Pin Mills for phosphorus Amine?

Before boot, the connection area, seal And the line and the like are meticulous inspections, and everything can be checked if there is no problem before running the powder classifier.
The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.

Shan dong alpa specializes in the production and development and service of Pin Mills for Phosphorus Amine product technology, welcome to come to consult. Company finishBeautiful quality, excellent service, the most affordable price, customer first attitude provides the best crusher products and services to customers.