Cell Crusher of Povidone

With the rapid growth of China, high-energy mining machinery industry, especially Cell Crusher of Povidone will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development of the entire mineral powder industry, green, environmentally friendly, healthy fluidized bed jet mills and products are more extensive. When applied to people's lives, it is necessary to optimize the use of equipment technology.

For the service life of Cell Crusher's Povidone, it has always been kept in keeping in keeping using common sense.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Cell Crusher Of Povidone is cleaned in time. Keep the internal cleaning of Cell Crusher's Povidone to avoid oxidation of the material and the inner contact.


ALPA Soybean Cell CRUSHER OF POVIDONE case Share: The customer is a company in the Netherlands. The company needs ultrafine pulverization to soybean meal (after oily oil). Investigating European equipment manufacturers, integrating, or our ALPA equipment is better than the performance ratio, or from cost performance. Through the incoming experiment, the company chose our company's Cell Crusher of Povidone.

Cell Crusher's is widely used, do you know how to use it correctly? The following content hopes to help you.

2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the downtime is:

inverter -Vehicle - Main Air Valve - Compressor - Level Leaf - Motor Cyclone Material, Dust Switch - Fan - Main Power - Air Compressor.
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

AlPa produced Cell Crusher of Povidone is equipped with high quality equipment, supported by demand, equipment model, high efficiency, simple operation, 24 hours, consultation!