2021-11-15 08:15:09
Pin Crusher For Black Carbon Black is good, only need to be produced in a smooth floor placement, and low noise, which can avoid dust leakage during the pulverization process, favored by the powder industry.
The crushing product is in addition to the particle size, and the particle size distribution is narrow, the particle name is smooth, the particle shape is high, and the high activity is high, the dispersibility is good.
ALPA Kaolin Pin Crusher For Black Carbon Black Case Sharing: The customer is a kaolin powder company in India. The customer needs a grading equipment to select the kaolin ultrafine powder. It has been investigated a lot of companies. Find proper. Finally, our AlPA meets the customer needs for the classifier equipment provided. The set of equipment has reached 4T per hour.
PIN CRUSHER For Black Carbon Black Job Safety Application Basic Requirements
1 The line is not allowed to use iron and sticks instead of hair.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.
Users who need to purchase airflow pulverizer, air flow mill, ultrafine pulverizer, eddy current pulverizer, medical gas flow crusher, ultrafine pulverizer, cone mixer, Chinese medicine crusher, etc. Can contactUS.
Previous: Cell Crusher for Wax
