Hammer Mill of Soft Magnetic Powder

Hammer Mill of Soft Magnetic Powder is well balanced, only need to be produced in a smooth floor, and low noise, which can avoid dust leakage during the pulverization process, favored by the powder industry.

How do I solve if the dust is too big?

1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;

2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.

The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.


AlPa Quartz Powder Hammer Mill of Soft Magnetic Powder Case Sharing:
The main products of a silicon micron powder include molten stone sand, molten silicon fine powder, soft composite silicon powder, high purity and ultra-fine Silicon fine powder, activated silicon fine powder, crystalline silicon fine powder, spherical silicon fine powder and other specifications.
Main uses: Photovoltaic solar industry and electronic package materials, high temperature refractory materials, aerospace materials, quartz glass tubes, quartz ceramic rolls, and coated copper industries.

Product particle size: Remove 20μm with fine powder
hour yield: sorting efficiency 60-90%

Hammer Mill of Soft Magnetic Powder how should I operate?
Before the pulverizer starts, first scroll the rotor first, check the jug, the hammer and the rotor operation is flexible, there is no bumps in the shell, the rotation direction of the rotor is not the direction of the machine arrow, power machine and crushing The machine is smooth is outstanding. Do not replace the leather wheel at will, to prevent the transition chamber produce burst of pulverization, or the speed is too low
affect the work efficiency of the pulverizer. After the airflow pulverizer starts, it should be idled for 2-3 minutes, no abnormal appearance, then press the job. At any time, you should pay attention to the job status of the crusher.Load operation.If there is found that vibration, noise, the bearing and the body temperature is too high, the external spray, etc., should be immediately stopped, exclude the failure of the sustainable job.

ALPA is a manufacturer dedicated to powder grading machine, precision classifier, laboratory grade machine, and we have years of production experience in the production of products, while in many mechanical productsWe also have achieved a lot of important breakthroughs in the field, and believe that you will be the primary choice for your product purchase.