Rotor Mill for Carbon

Rotor Mill for Carbon is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is fine, and the granules are delicate, affordable.

Rotor Mill for Carbon is used to crush the item, then the crushing items and tailings will also be discharged in time. When the crusher discharges these crushing items, there will be dust.
How do I solve if the dust is too big?

1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;

2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.

The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.


ALPA Cobalt Silicate Material Rotor Mill for Carbon Case Sharing:
A energy company is a professional car with a lithium-ion power battery for new energy vehicles, with lithium-ion batteries in energy storage High-tech enterprises in R&D and industrialization, the company actively responded to national policy calls, in order to promote new energy vehicles rapid, sustainable development, adhere to the road to independent research and development, with complete independent intellectual property rights, Successfully developed multiple series of lithium-ion power battery batteries, all have been widely used in China's electric new energy vehicle, market distribution has spread all over the country.

Product particle size: D50: 15μm
Hour Yield: 600kg

How to solve the problem of Rotor Mill for Carbon noise? Let's take a look.
1. If a lubricating oil is added to the rotating section, if the bearing and the shaft are relieved, the bearing will be adjusted; if the bearing wear is impeded, the bearing will be replaced.

3. Install a muffler on the fireplace of the crushing room.
4. Resistance equipment, such as using damping boards.


Shandong AlPa supplies all kinds of Rotor Mill for CarBon.If you need to buy Rotor Mill for Carbon, please feel free to contact us.