Rotor Grinder for Lithium Iron

Environmentally friendly Rotor Grinder for Lithium Iron has gradually become the market leading to mechanical equipment. At this stage, the modern new mechanical equipment in the machinery manufacturing industry has gradually replaced traditional roughing and mechanical production, and thereby producing production It has also become a new dominant leading to the realization of technological innovation and upgrading at this stage.

The main application of Rotor Grinder for Lithium Iron determines its extensive application range and fineness of the finished product.
Typical materials are: super hard diamond, silicon carbide, metal powder, etc. High purity requirements: ceramic color, medicine, biochemistry, etc., low temperature requirements: medicine, PVC. By changing the normal air of the gas source into an inert gas such as nitrogen and carbon dioxide gas, it can be used as an inert gas protection device. Suitable for crushing of flammable and explosive and oxidative materials.
ALPA Aluminate Rotor Grinder for Lithium Iron Case Sharing: The company discovered that domestic ultrafine pulverized equipment, which has been flattened with similar companies in foreign countries. And the price is more advantageous than foreign similar import companies. Finally, our Rotor Grinder for Lithium Iron was purchased as a production equipment.

finished particle size: D97: 20μm
Production capacity: 100kg


In order to have a further understanding of Rotor Grinder for Lithium Iron, the underlying machine is simply analyzed Common problems and how to solve these problems.

A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
2, ask: The custom pulverizer can be used in different materials. What is the difference between them?

A: (1) After the food and drug is crushing, it is necessary to meet the level of food safety, the best choice for stainless steel materials, because the mirror is polished inside and outside, does not produce iron pollution. (2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal. (3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?

A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device selection may not beIndeed.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.

Rotor Grinder for Lithium Iron has a lot of normal use specification, and I want to know more about the ultra-fine gas flow classifier, welcome to consult with us!