Impact Mills of CLAY ORE

Impact Mills of CLAY ORE As the name implies is a mechanical equipment applied to the production area, which is mostly used in pulverizing granules, fast pulverity, good accuracy.

an Impact Mills of Clay Ore The cost is very high. If you want to use Impact Mills of Clay Ore for a long time, please pay attention to the following:

In the production process, the temperature rise of the bearing should often be checked, when the temperature rise exceeds 50 ° C. It should stop checking, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. Most Mills of Clay OORE's host and level distribution bearings are lubricated with special grease (265-295 degrees).
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a seven-point introduction to the daily maintenance of Impact Mills of Clay Ore.


ALPA Chemical Material Powder Impact Mills of Clay Ore Case Sharing:
A mechanical company is a complete set of solder wire equipment, tin powder equipment, solder paste equipment, pure zinc equipment R&D, manufactured high-tech enterprises.
With complete, scientific quality management system and powerful R&D team, and continuously improve product performance.
The company is also a large-scale professional equipment manufacturing enterprise in China.
Case parameters:
Product particle size: Remove 20μm with fine powder

Installation, operation and maintenance is three IMPACT MILLS of CLAY ORE An important factor. The wear and consumption of each operation has always been a key factor in each startup operation. In order to use the airflow pulverizer for a long time, please adjust the open mode. Boot is standard, for initial contact and useFor a friend of this device, it is always a very strange state. In fact, it is very simple, the best way is to familiarize yourself with the consumer content or no use value, timely specification and familiarity.After each startup, check the airflow pulverizer in time to develop good usage habits.In the future, we don't need to pay attention to and familiarize.
The airflow pulverizer has improved and improved from the design and component combination, gave us a lot of help.It is good quality, but it is also declined for a long time without maintenance and maintenance.Check the operating components, electrical components, and transmission.Once an abnormality occurs, please repair it in time, without a fault, gas mill, prevent accidents.

The technology of AlPA production of Impact Mills of Clay Ore is simpler, making the classifier wear resistance better.Friends needed to come to us!