2021-11-10 08:44:11
Environmentally friendly Cell Grinder of Plastic Powder has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the machinery manufacturing industry in the machinery manufacturing industry has gradually replaced the traditional rough mechanical processing and production. It has also become a new dominant leading to the realization of technological innovation and upgrading at this stage.
Cell Grinder of Plastic Powder is applied to the ultrafine pulverization of the material. After the material is extracted, the properties of the powder will have a large change in the properties of the powder, which is high viscosity after being affected. Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design.
Shan dong alpa design and developed materials were significantly effective in the crushing of materials.
Cell Grinder Of Plastic Powder Compressed Gases Injiginal particles in the bucket into the disc shocking chamber 3 through the high-speed jet produced by the feed nozzles, and there are several jet nozzles around the crushing chamber. The high-speed fluid is injected in the direction, producing an ultra-high-speed swirling in the pulverizing chamber. The coarse particles in the opposite ultra-high-speed swirls in the superiospantial cyclone generate hit and friction in the intersection, and the particles were quickly pulverized.
When the particles are pulverized to the pulverizing particle size below the pulverized particle size, the centrifugal force of the particle movement is reduced, and the pulverization is separated from the center of the center, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in both directions. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverizing effect, and only in the other direction, the particles are opposite, and the particles produce effective impact.
Therefore, this impact of the intersection is limited, and the energy of ultra-high-speed moving particles is not fully utilized, so the production energy consumption is still high.
AlPa Trimage Materials Cell Grinder of Plastic Powder case share: The company requires a three-dimensional material ultrafine pulverizer, and our AlPA's Cell Grinder of Plastic Powder is also well known in the industry. There is a lot of proportion in the industry. Through experiments, the company purchased a Cell Grinder of Plastic Powder of our company.
Technical parameters:
Production capacity: 5-10kg / h
Let me introduce the method of operation of Cell Grinder of Plastic Powder.
2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping. If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.
ALPA also believes that future airflow crushing technology will become better and better, users who need to purchase such products can contact us.
