Pin Grinder of Yuanbao MAPLE SEED

PIN grinder of yuanbao maple seed can be used for important or need to be grounded to granular product processing, ALPA ultra-fine pulverizer product is good, affordable, factory direct sales, also to promote after-sales maintenance services for customers, service attitude

The distinction between the ultrafine pulverizer and the ordinary pulverizer is in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.

ALPA Organic Pigment PIN Grinder Of Yuanbao MAPLE SEED Case Sharing: The company is a Taiwan chemical raw material company. In 19 years, the company purchased a mechanical grinding of pulverized organic pigments from our ALPA. machine.
Technical parameters:
finished particle size: D50 less than 325 mesh
Production capacity: 300kg

Pin Grinder of Yuanbao MAPLE SEED has many core accessories, and these accessories are also fragile parts Once you don't pay attention to maintenance, you will cause serious consequences, especially if the airflow grinding spindle will cause downtime, and cannot estimate the output loss. The following sections describe the reasons for the gas flow grinding main axis.
The cause of the airflow grinding main shaft is easy to damage:
1. Since the pulverizer is a long-time crushing and ground bulk ore, the mechanical impact will cause fatigue damage to the spindle, if it is operated, the surface of the spindle Will wear, if you don't pay attention, cracks are generated.
2. The air supply will pass the airflower overload. When gas flow is used, you need to feed it properly, and each machine is limited. If this is exceeded, the component is easily damaged in the load operation, which will affect the overall service life of the airflow.
3. During mining and transportation, ore is often mixed with some waste metals. When these objects are in electromagnets at the upper portion of the belt, the electromagnet cannot be Excluding, causing these materials in ore and mud into gas flow, resulting in frequent iron, resulting in frequent impact on the spindle and other portions.
The above is why Pin Grinder of Yuanbao MAPLE SEED spindle is easily damaged.

Welcome everyone to choose our Shandong AlPa, company specializing in the production and development and service of gas flow crusher product technology, the company provides customers with safe and reliable PIN GRINDER OF Yuanbao MAPLE SEED products and services, solvingThe worries of our customers.