Vibration Crusher Olive Pit

Vibration Crusher Olive Pit is well balanced, only need to be produced in a smooth ground, low noise, and avoid dust leakage during the pulverization process, which is favored by the powder industry.

A Vibration Crusher Olive Pit is very high. If you want to use Vibration Crusher Olive Pit for a long time, please pay attention to the following:

1. In the production process, Temperature rises in the bearing frequently, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. Vibration Crusher Olive Pit Host and level distribution bearings are lubricated with special grease (265-295 degrees).
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a seventeen introduction to the daily maintenance of Vibration Crusher Olive Pit.


ALPA lysis of carbon black Vibration Crusher of olive pit case sharing: The company is a renewable energy application company in Inner Mongolia, when the company recovers the waste tire, it needs to be used. Ultrafine pulverized equipment is superfined by cleavage carbon black. After many incidents, we have selected our AlPA's Vibration Crusher Olive Pit.
Technical parameters:
finished particle size: D90: 500 mesh
Production capacity: 2T

1, check before booting Whether there is oil at lubrication.
2. Turn off the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.

To learn more about the knowledge of Vibration Crusher's Olive Pit, you will go to Shan Dong Alpa, the company is in research and development and production of crusher and crusher related products, quality, and is well received by consumers.,trustworthy.