Rotor Grinder of Needle Coke

With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of changing market, only constantly innovation, constantly improve your own technical level, constantly improve your own products, in order to make the Rotor Grinder of Needle Coke industry have a broader development space.

Rotor Grinder of Needle Coke has a wide range of smudges, simple and convenient operation, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
ALPA Activated Carbon Rotor Grinder of Needle Coke Case Sharing: This customer is a research institute Dalian, which requires ultrafine pulverizing activated carbon during research. Investigate a number of domestic vendors, and finally choose to work with our AlPa, purchased a Rotor grinder of needle Coke.

1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.

3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6If damage should be replaced immediately, certain components should be checked.

The company produces a variety of Rotor Grinder of Needle Coke and airflow mills, complete test methods and sample equipment and laboratory equipment, and the production of pulverizer is widely used in chemical, pharmaceutical, minerals, electronics,Pesticide, ceramics and other industries.Welcome to contact us if you need to buy products.