Impact Mill Machine of Coal Gangue

With the development of society, the application of Impact Mill Machine of coal Gangue has become more large.

The main advantage of Impact Mill Machine of coal Gangue is to change the linear and surface impact grinding of conventional grinding machines to space three-dimensional impact grinding, and take advantage of high-speed airflow generated by jet in the substance flow of the pulverizer. To produce a gas-solid pulverization and grading circulating flow effect of a similar fluidized state, improving the efficiency and energy integrated utilization of impact crushing.
The high-speed airflow generated by the jet impact can be fully utilized to the material flow of the pulling chamber than the other conventional methods. The average energy consumption is reduced by 30% to 40%. Since the impact-crushing area and the gas-solid flow zone are placed in the intermediate space of the pulverized chamber, the impact corrosion of high-speed airflow driven materials is improving, and the jet impact grinding process is improved. The most severe wear problem greatly reduces the possibility of material pollution, using high purity nitrogen, argon and other protective gas as a working medium, prevent oxidation, low-loop operating gas consumption, low cost. During the fully closed-loop operation, no dust is flying, and there is no contamination of the environment, and it is unharitten about the human body.

ALPA Ceramic Powder Impact Mill Machine of Coal Gangue Case Sharing: This customer is a mechanical equipment company, mainly engaged in drying, granulation, mixing equipment production and sales, the company's technical strength is strong, High-tech enterprises integrating technical intensive and integrated knowledge.
The customer lacks experience in powder grading, but many ultrafine powder is currently required to select ultrafine powder for ultrafine powder. The customer has chosen our ALPA as a partner after investigation. Provide a grading machine device for its customers' ceramic powder production lines.
As a crusher manufacturing large enterprise, Shandong ALPA has been working to provide customers with greater value, the fineness, production capacity and installation site of each project is important information for custom selection, pre-sales service session.
AlPa There are 24-hour online customer service to answer questions, provide an ideal grading machine production line solution, and provide the factory quotation to increase escort for ceramic powder grading projects. Welcome major ceramic powder manufacturers to inquire.

1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zeroStart, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

If the later period is intended for superfine grade machines, precision grading machines, jet classifiers, you can directly contact us, product quality is guaranteed, fair, good service, welcome everyone to buy!