2021-11-04 11:17:10
With the rapid growth of China's economy, high-energy mining machinery industry, especially Turbo Grinder for granular Silicon will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development of the entire mineral powder industry, green, environmentally friendly, healthy fluidized bed jet mills and products are more extensive. When applied to people's lives, it is necessary to optimize the use of equipment technology.
In the production process of breaking using Turbo Grinder for Granular Silicon, the ultrasonic air flow generated by the equipment can constantly collide between materials, and this supersonic airflow can also produce raw materials. A very good impact, and then the material can also have a good crushing effect with the inner wall of the equipment.
ALPA Pigments Turbo Grinder for Granular Silicon Case Sharing: The customer needs to use the pigment ultrafine pulverization equipment during its production. Through the ultrafine pulverization of the pigment, improve the quality of the product. After many other than the same type of equipment, we finally chose our Alpa's Turbo Grinder for Granular Silicon. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range. Technical parameters:
finished particle size: D90: 13μm;
Production capacity: 130kg / h
First, the air blower
1. Because the blades in the fan are particularly easy to accumulate, so they must clean the dust in the fan every week.
2, add the bearing box once a month.
3, if there is an abnormality in the fan, it is necessary to stop the ultrafine gas flow classifier for inspection.
Second, the host
1, you should check the graded impeller, spiral feeder, smash nozzle each year, see if there is wear, whether there is a place to replace.
2, running to a certain time, in order not to affect the use of ultrafine gas flow grading machine, some parts must be cleaned.
3, the bearing should make the right amount of lubrication, which will make the temperature abnormally.
Third, the planet waste valve
1, if the ultrafine airflow classifier has an abnormality, it must be downtown immediately.
2, the impeller and the body are cleaned every three months.
3, plus lubricants should also have every three.
To learn more about Turbo GRINder for Granular Silicon's knowledge, to Shan Dong Alpa, the company is in research and development of crusher and crusher related products, quality multiplication, and is a welcome, trustworthy.
Previous: Rotor Crusher for Manganese Oxide
