Turbo Mill for Plastic Powder

Many friends who want to produce industrialized must be unfamiliar with Turbo Mill for Plastic Powder. Turbo Mill for Plastic Powder has a convenient, comminuted speed, and quality of crushing product. It is a very useful crushing machine. .

With the increasing social demand, Turbo Mill for Plastic Powder's performance, product quality, etc. are facing huge challenges. Therefore, ALPA Technology Co., Ltd. persisted, continuously improved the ultrafine pulverization strength, particle size distribution, particle crystal form, etc. to achieve more production.
ALPA, strive to achieve low energy consumption, high yield, non-pollution in ultrafine pulverizer, to achieve good particle size, dispersion, unique and potential performance, improve powder crusher competitiveness, and realize the environment Protection and low power performance.

A new energy company is a high-tech enterprise focusing on high performance lithium battery materials, and the company's main business sector involves the development and production of battery materials. Development and technology transfer with sales and battery technology.
The company is based on the development of lithium battery materials and technology. The company adheres to the innovation of science and technology, leading the future concept, and grows forward to new energy technology companies with core competitiveness.
Case parameters:
Product particle size: go to 3μm fine powder
Hour yield: 150kg

1, when the crusher work, operation The person should stand in the direction of the cutting line of the hammer, and if you don't wear your gloves, your hands must exceed the security line, not allowing iron and sticks instead of hair.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6, pulverizer startAfter the next time, it will be idled by 2 to 3 minutes, and there is no abnormal phenomenon.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.

Shandong AlPa is a source manufacturer specializing in Turbo Mill for Plastic Powder, all year round to provide equipment for domestic and foreign customers, welcome to inquire!