Pin grinder of pps

People currently use in daily life are also more, PIN Grinder of PPS is smashed into standard size, usually smashed into micrometers, usually our equipment is The plurality of devices are constituted, and is usually composed of a portion of a coarse crushed, fine powder or a wind device, or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.

1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.
ALPA Carbon PIN Grinder of PPS Case Sharing: The company produces superfine and super fine pulverized in the production of static pressure graphite. After multi-party investigation and experiment, finally selected our AlPA as a cooperative customer, we provide the PIN Grinder of PPS to meet its needs of carbon pulverity, particle size, yield, and other needs.
Technical parameters:
finished particle size: D65: 200 mesh
Production capacity: 800-1000kg

We need to take some measures to be taken again in order Protect them.
1. First, the gap of the hammer screen can be adjusted: the friction on the screen changes varies from the distance between the material and the screen, and the friction is different. Improve the hammer speed and hammer material efficiency by adjusting the hammer net gap. However, during the production process, the screens they use are also different, the raw materials are different, the hammer screening clearanceIt also needs to be adjusted; in the crusher, the pulverizer is not very good at the beginning, but after a period of work, the particles inside the crusher will also have a large change; in the grinding machine parts, the hammer head is easy to worn, hammer After head wear, the gap between the hammer head and the screen increases, and the output is also declining, and it is difficult to maintain.
Of course, in order to test the yield of a crusher, for some of the raw materials, for some screen holes, in order to determine the appropriate hammer sieve gap and suction, the useful life of the screen and the hammer can be obtained in a short time. Very high grinding efficiency data. However, in the production of feed grinding, such specific measurement data, according to the operator's work experience, the technical content of the crusher itself is two things. People with enrichment of experience and labor experience also require higher operating costs. When the hammer is worn, the gap between the hammer and the sieve increases, the friction is reduced, and the abrasive efficiency is lowered.
2.pin grinder of PPS mainly requires a reasonable use of reverse glitch: Mainly to rush the side hair of the screen into the interior, greatly increase the friction, but this method is not used for a long time. After the globi polishing, the efficiency is lowered. It lasts for 30 minutes to 1 hour.
3. Put the friction piece into the PIN Grinder of PPS: The friction plate has the effect of the material ring, but the effect is limited. First, the teeth of the friction plate are in front of the hammer head, the friction surface is small, and the hammer is long-lasting; if the sieve area is too small, the output screen area will be reduced.

The technology of the PIN Grinder of PPS produced by AlPa makes the structure easier to make the classified machine wear resistance. Friends needed to come to us!