2021-10-20 15:28:55
When the Vertical Air ClassifierfishBone screen material, under the pressure of the rotary duct, the screen has good commonity. At the same time, under the gravity of the air blower, the screen collects the qualified material, automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the classifier without the need for rotating components. Through the precise control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors. The material is driven by the blower of the airflow pulverizer. The lowermost inlet of the classifier is moved upward to the hierarchical area, the strobe, the strongest centrifugal force generated by the high-speed rotation grade turbine. The fine particles that satisfy the particle size are entered into the cyclone separator or dust collector by the gap of the grading wheel blades. After collecting, some fine particles of the crude particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.
Vertical Air ClassifierfishBone Operation Performance: In the cyclone dust collector, the bag dust collector is auxiliary, the host is set in the centrifugal grading device, which can be fine grind, and has a classification function, the wind is cut, no screening or mesh Gee, powder particles can be adjusted arbitrarily, after crushing materials, negative pressure delivery to the exhaust valve port, reach the product requirements, and the ultra-fine classifier is widely used in chemical, dyes, coatings, pharmaceuticals, food and other industries.
In the production of Vertical Air Classifierfishbone, there will be a large amount of dust, and if there is a lot of dust, it will have a certain impact on the environment. How should we deal with it? Method: 1. Install the dust collector: Generally, this dust collector can now be used with a powder classifier. It puts dust income trapping bag, dust is filtered by the dust box; 2, cloth bag dust: cloth bag and machine The powder is tightly, preventing leakage powder. Attention should be paid attention to parking, and it should be cleaned with dust during parking. 3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.
[1twenty three]
