2021-10-19 13:08:55
Vertical Air Classifier With Aluminum Hydroire is a very common and common pulverizer. It has a wide range of applications involving many industries.
How to continuity Vertical Air Classifier With Aluminum Hydroxide life? Here are the following aspects: 1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault. 2. When the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3. Regularly check the lifting parts, promptly guarantee the quality of production and production. 4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick. 5, the host and gradient flow bearing oil grease lubrication, the use of special grease, and the degree of 265-295.6, and the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high. 7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.
Vertical Air Classifier With Aluminum Hydroxide produced by our company not only from 20-2μm from ordinary powder, but also directly with mechanical pulverization equipment, forming a closed circuit, improves pulverization efficiency. And can avoid high temperature in the cavity to cause adhesion, glue, glue, causing the operation, and the grading machine has also received a well-praised, and the friends who need it will contact us!
