2021-10-19 13:08:46
It is well known that the product technology of Vertical Air Classifier of Xanthan Gum has been widely valued by the industry.
Many manufacturers who want to make a crushing process will choose to buy a Vertical Air Classifier of Xanthan Gum, but not all crushers can apply production and processing, erroneous processing methods will make the pulverizing velocity quick. The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large. The equipment operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement loss. The products after the crushing products are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure. The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.
The working principle of Vertical Air Classifier of Xanthan GUM is to use high-speed rotating hammers to impact materials, crushing the decision surface, the obedient surface, and the fragile part of the natural gap. The material sent to the crusher is affected by the rotor, and the rotor rotates around the central axis at a speed of 25 to 40 m / s, and breaks the first time. The material then obtains the energy disc from the rotor, flying on the hard wall at high speed, and performs secondary comminution.
After long-term use, it is necessary to clean Vertical Air Classifier of Xanthan GUM. All machines should be disassembled before the airflow pulverizer is cleaned. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When unloading, you can remove the four screws on the base and remove the hopper. When sieved, the air pulverizer door can be opened directly, and finally the screen can be disassembled. After removing the mobile gear, release the fastening nut first, then separate the live teeth from the spindle. Then remove the active gear and place it safely. Remove the fixed gear, removeScrews and remove the fixed gear. Be careful when disassembling the air pulverizer and never allows damage to the machine components.
Today, the knowledge of Vertical Air Classifier of Xanthan Gum is introduced to you. For more information, please continue to pay attention to our website.
