2021-10-08 17:24:53
Everyone knows that choosing a product or service, to learn from all aspects of the milling machine processing, service, quality, etc.
What is the grading principle and process of FL Multiple-stage Classifier in Seriesammonium Sulphate? Below, you will share it with you. 1. Open the switch in the control cabinet, start the power supply, the device operation; Physical role such as airflow and gravity is graded in three parts; 5, the airflow of three flow paths has a control valve group adjustment to maintain their respective balance; 6, the grading thick Chinese products are recovered separately; 7, clean air There is a blower to discharge into the atmosphere.
In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault. When the new machine is running, the transmission belt is easy to elongate, pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt. If you want to check, you should replace production quality and production in time. Blades, the lining should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is replaced after the particle size is replaced. The host and the grading flow bearing are lipids, and the 2nd special lipid is used. The replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the outer space space in the bearing cavity. Do not fill the grease. Otherwise It will cause too high of the bearing temperature. The spiral feeder has changed the lime than half a year, and the calcium-based grease is added. In the output shaft E, ie the pulley E, avoiding heavy hammer, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-z7-degree anti-motor oil pressure oil, and the deceleration machine is used 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.
Welcome everyone chooses Shandong AlPa Powder Technology Co., Ltd., the company is committed to the products and services of FL Multiple-stage Classifier In Seriesammonium Sulphate, our company provides Fl Multiple-Stage Classifier in SeriesaMmonium Sulphate, the price is low, if you are interested in our products, please feel free to contact us.
