Horizontal Air Classifier for pesticides

Horizontal Air Classifier for Pesticides works by a complete crushing system composed of crushers and cyclone separators, dust collectors and air blowers. After the compressed air is filtered, the high-speed nozzle is sprayed into the crushing chamber, and the material is pulverized by repeated collision, friction and shearing at the intersection of the multi-high pressure airflow. The crushing material moves together with the rising airflow to the grading area with the suction of the fan. Under the action of centrifugation, the thickness of the material is separated, and the grading cyclone is required to grade the cyclone to enter the cyclone dust collector, and the coarse comminution continues to be pulverized down. Suitable for dry crushing of various materials that are less than 9 in the Moh-hardness, especially for high hardness, high purity, high value-added crushing materials. It includes a vertical classification device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. Low temperature without media crushing. It is especially suitable for thermal sensitivity, low melting point, sugar-containing and volatile substances. The grinding process mainly depends on the collision of the material itself, which is different from the impact of the mechanical crushing blade or the hammer on the ground on the ground, so the equipment has high wear resistance and high product purity.

Horizontal Air Classifier for Pesticides is not small, the material is stacked in the silo plate knot, and the material is absorbed, the material is in the silo, the silo cone angle design There is no reason such as the rest of the material. Solving silo does not smoke suggests design phase to fully understand the properties of material, such as pile specific gravity, liquidity, moisture resistance, rest horn, particle size, flammable and explosive. Adding auxiliary measures, such as air disc, a hammer, air blowing, vibrating mitigation mechanism, artificial beats, etc. The pulverizer is an apparatus for ultrafine pulverized dry materials with air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber by the feed opening, and is crushed by the polishing wheel that is circumferential movement along the grinding rail, and dissensibly. The pulverized material brings out the pulverizer through the negative pressure air flow caused by the fan, into the material collection system, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed. Horizontal Air CLAThe feeding system of SSIFier for Pesticides is one of the key components. It often encounters problems in actual use, such as the silo, not even if the feed is not uniform, and even can't feed. Simple analytical materials with unevenness of feeding are more sticky or fluidity, and the feeding system design is defective. Feeding uneven solution recommendations According to the material properties of materials, such as silhouette structures, auxiliary sheet structures, feed valve structures, auxiliary feed, and ventilation and control systems. The feeding system is generally silo, auxiliary tablet equipment, and feeding mechanism three parts, depending on the properties of material, the design parameters of the feeding system are different. The above is the use of the Horizontal Air Classifier for Pesticides product precautions and simple solutions. Everyone must pay more attention when using.