2021-10-10 17:24:15
When the FL Multiple-stage Classifier In Series of Carbon Black screens, the screen has good commonity under the air pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the classifier without the need for rotating components. Through the precise control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors. The material is driven by the blower of the airflow pulverizer. The lowermost inlet of the classifier is moved upward to the hierarchical area, the strobe, the strongest centrifugal force generated by the high-speed rotation grade turbine. The fine particles that satisfy the particle size are entered into the cyclone separator or dust collector by the gap of the grading wheel blades. After collecting, some fine particles of the crude particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.
How to install FL Multiple-stage Classifier In Series of Carbon Black, the following content hopes to help you. 1. Chinese medicine shredder should be more smooth and easier to use. 2. Before working in traditional Chinese grinding machines, a clean processing material must be selected. Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults. 3. Before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work. 4, turn on the power, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power supply should be disconnected immediately. In the new pulverizer raw material, the exit is fixed with a long bag. 5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is used normally, it is not easy to damage, and the production efficiency is high.
Welcome everyone to choose Shandong Alpa Powder Technology Co., Ltd., company specializing in FL Multiple-Stage Classifier In sEries of Carbon Black Product Technology Production and Development, the company provides customers with safe and reliable products and services to solve the worries of customers.
