Multiple Classify Wheel Classifier with ammonium sulphate

Many friends who want to produce industrially produced must be unfamiliar with Multiple Classify Wheel Classifier With ammonium sulphate, Multiple Classify Wheel Classifier with ammonium sulphate has convenient, fast pulverity, and quality of crushing product, is a very Used pulverizer.

Multiple Classify Wheel Classifier With Ammonium Sulphate has a wide range of smudged, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different. The crushing machine is highly affected by the following factors: the temperature and pressure of the gas ratio, the feed particle size, the work quality, and the pulverization aid. The gas-solid ratio of the pulverizer is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which in turn affects the fineness of the product. However, if the gas is too high, it will not only waste energy, but will even degrade the dispersion performance of certain pigments. When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 ~ 200 mesh when pulverizing calcination; the material after the pulverization surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh. So, should you choose how high pressure when crushing? Those skilled in the art depends primarily on the comminutability and fineness requirements of materials.

Multiple Classify Wheel Classifier With WITH AMMONIUM SULPHATE Work: Airflow Crusher and Cyclone Separator Drainage Machine Machine Map into a complete crushing system, compressed air is filtered and dried, then pass the Lavar nozzle in multiple high pressure The air intersection enters the crushing room at high speed. stream. The material is repeated collision, friction and shear, and the pulverized material is pulverized in the fan pumping force. Under the action of the high-speed rotary classifier, the fine particles that satisfy the particle size required by the grading wheel with the thickness and fine product separation into a t-cyclonic separator and dust collector by the grading wheel with the thickness, fine particles required to satisfy the particle size. Particles and continueCrushed area crushed. High-pressure gases (compressed air, superheated steam or other gases) injected around the broken chamber and the high-speed air flow consisting of solid particles in the crushing chamber are subjected to the tangential impact of the air flow injected from different angles, so that the solid particles are mixed in the mixed airflow. Mutual collision and friction and refine.