Multiple Classify Wheel Classifier of slag

Multiple Classify Wheel Classifier of Slag is a crushing equipment commonly used in industrial production. Due to its excellent performance, it is widely used in the pulverization operation of various materials. Although this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

Multiple Classify Wheel Classifier Of SLAG can be used in series with a multi-stage classifier and produced a product having multiple particles. The device is easy to disassemble, the inner wall is smooth, and there is no dead angle. The whole system is sealed, less dust, low noise, and production process clean and environmentally friendly. The control system uses program control and easy to operate.

Multiple Classify Wheel Classifier Of SLAG is not small. The reason is simple. The material is stacked in the silo plate knot. The material is taking the material, the material appears in the silo, the silo cone angle The reasons for the rest of the reference materials without reference materials. Solving silo does not smoke suggests design phase to fully understand the properties of material, such as pile specific gravity, liquidity, moisture resistance, rest horn, particle size, flammable and explosive. Adding auxiliary measures, such as air disc, a hammer, air blowing, vibrating mitigation mechanism, artificial beats, etc. The pulverizer is an apparatus for ultrafine pulverized dry materials with air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber by the feed opening, and is crushed by the polishing wheel that is circumferential movement along the grinding rail, and dissensibly. The pulverized material brings out the pulverizer through the negative pressure air flow caused by the fan, into the material collection system, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed. Multiple Classify Wheel Classifier of Slag's feeding system is one of the key components. It often encounters problems in actual use, such as the silo, not even if the feed is not uniform, and even can't feed. Simple analytical materials with unevenness of feeding are more sticky or fluidity, and the feeding system design is defective. Feeding uneven solving recommendations According to the material propertiesResolve problems, such as silhouette structure, auxiliary sheet structure, feed valve structure, auxiliary feed, and ventilation and control systems. The feeding system is generally silo, auxiliary tablet equipment, and feeding mechanism three parts, depending on the properties of material, the design parameters of the feeding system are different. The above is the use of the Multiple Classify Wheel Classifier of Slag products and simple solutions. Everyone must pay more attention when using it.

Shandong AlPa Powder Technology Co., Ltd. is committed to Multiple Classify Wheel Classifier of Slag, has a mature process process, the company has strong technical strength, specializing in the development of crusher, survive by quality, welcome everyone to come to consult .