FL Multiple-stage Classifier in Series for monosodium glutamate

FL Multiple-stage Classifier In Series for MonoSodium Glutamate will rise, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by overheating steam, the vapor pressure is typically from 0.8 to 1.7 MPa, and generally the pulverized calcined material is high, and the material after the pulverized surface is low.

In order to let everyone have a further understanding of FL Multiple-stage Classifier In Series for MonoSodium Glutamate, the following is a simple analysis of common problems and how to solve these problems. 1. Q: How do I choose equipment for materials that need to be smashed? A: (1) Moh's hardness is less than 3. The mechanical grinding machine and grading impact mill can meet the crushing requirements and save a certain cost. (2) High hardness, high purity material of Moh's hardness is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken. 2, ask: The custom pulverizer can be used in different materials. What is the difference between them? A: (1) After the food and drug is crushing, it is necessary to meet the level of food safety, the optimal choice of stainless steel materials, because the mirror is polished inside and outside, and there is no iron pollution. (2) Broken material is easily worn, and the purity is required to be high after crushing, and the stainless steel is optimal. (3) If the crush is not high, the cost is saved, and the air pulverizer of carbon steel material can be used. 3, ask: When using the airflow mill, the fineness of the finished product is not standard, how does it adjust the classification wheel? A: (1) If the new customized pulverizer does not meet the requirements of the granularity, the device selection may not be correct. Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchasing, and carefully check whether the experimental results are satisfactory.

Shandong AlPa Powder Technology Co., Ltd. mainly engaged in the production and development and service of FL Multiple-Stage Classifier In Series for MonosoDium Glutamate product technology, welcome to consult. With good quality and service, affordable prices, customers provide airflow crushing products and services for customers.