Multiple Classify Wheel Classifier pesticides

With the continuous development of pulverizer technology, Multiple Classify Wheel ClassifierPesticides has gradually penetrated into people's daily lives.

Multiple Classify Wheel ClassifierPesticides is suitable for microcarried machinery for materials such as synthetic resins, instruments. It is different from the ordinary pulverizer. It is not only a simple crushing force such as impact strength and cutting force, but also subject to a large number of ultrasonic eddy currents generated by the back of the blade and the vibration of high frequency pressure generated by the resulting material. Crushing can also be broken under certain conditions and have viscous and elasticity. The raw material temperature of the machine increased, and the thermal material can also be broken.

Multiple Classify Wheel ClassifierPsticides Operation Performance: In the cyclone dust collector, the bag dust collector is auxiliary, the host is set in the centrifugal grading device, which can be fine grind, and has a classification function, the wind is cut, no sieved or Grid, powder particles can be adjusted arbitrarily, after crushing materials, negative pressure delivery to exhaust valve ports, reach the product requirements, and ultra-fine classifiers are widely used in chemical, dyes, coatings, pharmaceuticals, food and other industries.

In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault. When the new machine is running, the transmission belt is easy to elongate, pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt. If you want to check, you should replace production quality and production in time. Blades, the lining should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is replaced after the particle size is replaced. The host and the grading flow bearing are lipids, and the 2nd special lipid is used. The replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the outer space space in the bearing cavity. Do not fill the grease. Otherwise It will cause too high of the bearing temperature. The spiral feeder has changed the lime than half a year, and the calcium-based grease is added. In the output shaft E, ie the pulley E, avoiding heavy hammer, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-z7-degree anti-motor oil pressure oil, and the deceleration machine is used 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months,New oil.

In addition to Multiple Classify Wheel Classifierpesticides, AlPa Technology Co., Ltd. also supplies powder grading machines, ultrafine grace machines, precision grading machines, ultrafine airflow classifiers, jet grading machines, etc. Welcome to buy!