Multiple Classify Wheel Classifier Fishbone

Many manufacturers who want to make a crushing process will choose to buy a Multiple Classify Wheel ClassifierfishBone, but not all crushers can apply production and processing, erroneous processing methods will make the pulverizer wear speed Turn fast. The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large. The equipment operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement loss. The products after the crushing products are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure. The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.

Multiple Classify Wheel ClassifierfishBone can be used in series with a multi-stage classifier and produced a product having multiple particle sizes. The device is easy to disassemble, the inner wall is smooth, and there is no dead angle. The whole system is sealed, less dust, low noise, and production process clean and environmentally friendly. The control system uses program control and easy to operate.

How to choose an energy-saving consumption that can be achieved by ultrafine grading, but also has an emission standard, good working environment, beautiful Multiple Classify Wheel ClassifierfishBone, give Some suggestions: First, according to the characteristics of the material you want, from the hardness, fineness, yield, addition value, the amount of metal impurities such as iron, the liquidity of the material, etc., the flow of the material, etc. The classification machine type. Second, according to the type of the classifier, which model is a superfine gas flow classifier, which model is a coarse powder classifier, which model is a grading machine that can smash higher hardness materials, which models are Stems, fibers, grease materials.