FL Multiple-stage Classifier in Series with pea protein

FL Multiple-stage Classifier In Series With Pea Protein Working Principle: The power of the machine uses purification and dry compressed air. The compressed air is sprayed to the crushing chamber at high speed over a special supersonic nozzle. The airflow has a high speed movement of the material, causing strong collision, friction and shear between materials and materials, thereby achieving breaking. Outlet, enter the collection system. The pulverized material rises into the classification chamber to meet the particle size required by the particle size, and the particles do not reach the particle size required to continue pulverization. The entire production process is fully closed, continuous operation, no dust pollution, purified by dust removal, filtration.

In the production process, we should pay attention to maintenance and maintenance of FL Multiple-stage Classifier In Series with Pea Protein. 1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find out the cause and troubleshoot. 2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt. 3, should be checked regularly, replace it in time, and ensure quality and production. 4, should check the wear of the blade and lining periodically. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced. 5, the host and the hierarchical flow bearing use grease lubrication. 6, the replacement period of the bearing is 2000 hours, the amount of grease is 1/2 or 3/4 (lower test) of the bearing cavity space cannot be filled with too much fat. Otherwise, the temperature of the bearing will be too high. 7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease. 8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part. 9. It is strictly forbidden to turn the handle of the handwheel in the stop. 10. The lubricating oil used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines. 11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of the second oil, then use it after 1000 hours.