Cell Mill of Chemically Derived Fiber

Most of the product production and processing in the current stage, using Cell Mill of Chemical Derived Fiber, using Cell Mill of Chemical Derived Fiber, is a very common way of processing, and the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

Cell Mill of Chemically Derived Fiber has a wide range of pulverized particles, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
ALPA Pea Protein Cell Mill of Chemical Derived Fiber Case Sharing: This customer is a food company in Russia. After looking for a lot of powder equipment enterprises, there is no suitable equipment. It has been influenced by the company's production and operation, and finally I saw the ultra-smash of pea protein before our website. Finally, through the incoming experiment, I finally determined Cell Mill of Chemical Derived Fiber purchased our company.

Finished particle size: 400 mesh
Production capacity: 1.5T


There is a lot of problems that need to be considered in choosing Cell Mill of Chemical Derived Fiber.

2, to clearly select the selected equipment, which components are easily worn, and the cycle of the wear member is moreLess, and whether auxiliary equipment is needed during homework, which devices, etc.Rational control of these will save time and financial resources to future production.
3, for the group's classifier to the manufacturer area, because the equipment costs have a large part of the equipment, and a device from designing to make a finished product is very complex, equipment manufacturerIt is not possible to fully introduce, and the equipment technical indicators given are used as reference only when the device is selected, and it is not possible to fully represent the parameters of the device.
4. When purchasing a grading machine device, try to purchase the associated auxiliary equipment together, so you can complete the installation at one time, save time, and put into production smoothly.

Shan dong alpa is a scientific and technological private enterprise producing various airflow pulverations, airflow mill, medical and air flow crushers, disc air thrower, and users who need to purchase such products.Contact us.