Impact Mills of Aluminum Silicate

In numerous pulverization mode, Impact Mills of Aluminum Silicate has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

Impact Mills of Aluminum Silicate is an industrial equipment that consists of a ball mill, a vibrating mill, and a power is 0.75 kW. With the development of society and the needs of people's lives, the industrial community is getting bigger and bigger, and the requirements for fineness, purity and pass rate are increasing, and the processing rate is very high. Micro-powder equipment is usually extremely expensive and low productivity.

ALPA lysis carbon black Impact Mills of aluminum silicate case share: The company is a renewable energy application company in Inner Mongolia, when the company recovers the waste tire, it is necessary to use ultrafine pulverized equipment to lysis Carbon black performs ultrafine pulverization. After many incidents, our Alpa's Impact Mills of Aluminum Silicate was selected.

Technical parameters:
Finished granularity: D90: 500 mesh
Production capacity: 2T

During the production process, the temperature rise of the bearing must be checked frequently, when the temperature rise exceeds 50 At ° C, the check is stopped, and the reason is to troubleshoot. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

As a 20-year powder engineering equipment manufacturer, Shandong, Shandong, has more than 3,000 customers at home and abroad, has always led the front of the industry, so before consulting, you need to provide crushing materials. Features information, granularity parameters, production yield range, purity requirements, specific process requirements (anti-high temperature, explosion-proof, anti-dust pollution, etc.), professional engineers provide phase by this informationAppropriate equipment models or system solutions should be appropriate.Welcome to inquire.