Turbo Mill of Straw

At present, Turbo Mill of Straw has gradually entered people's lives, more and more plants, and companies are using the equipment.

Generally, the high-speed airflow accelerated pulverized solid particles have the following three ways:

(1) Airflow particles accelerate nozzle: After the airflow and the particles are mixed, the particles can be obtained. Very high speed (almost the same speed of airflow speed), but the material wears in the nozzle in the nozzle, rarely used in practical applications.
(2) Syringe Acceleration Particles: High Speed \u200b\u200b(Ultrasonic Speed) airflow and particles mix accelerate in the mixing tube, the particles obtain a higher speed, but the material is severe to the mixing tube.
(3) Free airflow acceleration particles: particles enter the high-speed airflow in the form of freely drop, only the high-speed air flow is passed through the nozzle and the wear is small.


ALPA Trimetic Material Turbo Mill of Straw Case Sharing:
A lithium-electric material company main product is \"lithium electrode material\", the most important component of lithium ion battery includes an electrolyte , Isolation material, positive material, negative electrode material, outer casing, etc. High-end lithium battery sector for charging efficiency, high safety longevity life.
Case parameters:

Hours Yield: 300kg

Check before debugging:
1, newly installed equipment When the equipment is connected to the crushing warehouse, it is inevitable that foreign matter such as iron block, welding head, welding slag is residual. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.

4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the turbine dragons have slight winds, you can use your hands or fine powder.There is a feeling of suction in the interface, if you have a sealing treatment.After all of the above tests are normal, prepare the material production.


Users who want to view crusher related information can also log in to our website directly!