Impact Mill Machine for Ceramic Glaze

With the continuous increase in social needs, Impact Mill Machine for Ceramic Glaze is constantly being perfect in use performance, finished product quality, service life, etc., very well, which is well processed into micrometers or even nanoscale micropowe, and it is already Wide applications in many areas such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons have been widely used.

The overall development trend of China's material ultrafine crushing technology is to make a more ultra-fine pulverized equipment to various types of ultra-fine pulverization equipment towards low-cost, high efficiency, strong dispersibility, good dispersibility and stable quality. High technical requirements.
Impact Mill Machine for Ceramic Glaze Engineering Technology will need more and more high-purity ultrafine powder, and ultrafine powder technology will play an increasingly important role in high-tech research and development. Although high-purity ultrafine powder is prepared by chemical synthesis, it is too high, which is extremely difficult for industrial production. The main means of obtaining the ultrafine powder is still mechanical and pulverized, and ultra-fine pulverization technology is a combination of many technologies. Its development also depends on the progress of the relevant technology.

Therefore, the main development trend of ultrafine pulverization equipment has been developed with fine pulverized equipment with ultrafine pulverized equipment. Ultrafine pulverized equipment with low energy consumption, small land, and has high handling capacity. Integrated development of equipment and process research.

Ultra-fine pulverization and supporting equipment must be adapted to specific bored features and product indicators, and the scale model must be adapted.

Technical parameters:
Finished particle size: D50 less than 325 mesh
Production capacity: 300kg

1, The ultrafine pulverizer and power unit should be securely installed. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.

Shandong AlPa is a source manufacturer specializing in Impact Mill Machine for Ceramic Glaze, all the year round to provide equipment for domestic and foreign customers, welcome to inquire!